CN
EN
es 
ru 
Dec 11, 2024
Improper use of belt filter cloth can not only damage the product itself but also cause production delays. Therefore, taking good care of the filter cloth is a way to reduce costs. How should you properly use belt filter cloth, and what should you pay attention to? Bolian Filter Cloth Manufacturers summarizes the following seven key points, which we hope you will strictly adhere to:
1. During installation and use, avoid scratching the filter cloth with sharp tools. Pay special attention to the support plates—if there are any burrs, they must be polished smooth to prevent unnecessary damage and extend the cloth’s service life.
2. Clean the filter cloth regularly based on the material being filtered. Use appropriate cleaning agents depending on the properties of the materials to prevent pore blockage. This helps maintain optimal filtration performance and prolongs the cloth’s lifespan.
3. When cleaning the filter cloth, use a soft brush whenever possible. Using wire brushes can easily damage the fabric.
4.Before shutting down or during holidays, thoroughly clean the filter cloth and the material on the guide rollers of the machine to prevent hardening or damage to the cloth.
5. Pay attention to the dimensions when customizing the filter cloth. Cloth that is too wide or too long may affect its performance and usability.
6. To ensure filtration performance and longevity, maintain consistent feed volume and material concentration, and ensure that vacuum (negative pressure) meets operational requirements.
7. Storage: Filter cloth should be stored in a sealed, dry, and well-ventilated indoor environment. During storage, keep the cloth in its original packaging on pallets or in boxes. Avoid mechanical pressure, as this may cause perforations, punctures, or small holes, damaging the fabric’s structure.
